Princess 35M Motorboot

Basis informatie

Advertentienummer: 423503
Prijs: € 13.425.000
Maandprijs: klik hier
Soort: Motorboot
Merk: Princess
Type: 35M
Aantal Pk's: 0
Bouwjaar: nieuw
Ligplaats: Zuid-Holland, Rotterdam
Lengte/breedte/diepgang: 35.00 x 0.00 x 0.00m

Deze advertentie Afdrukken Princess 35M Advertentie Afdrukken

Contact opnemen met de adverteerder

Princess 35M




Length 115?4? 35,15m

Beam 23?11? 7,3m

Draft 7?2? 2,18m

Displacement 150 tonnes

Gross Tonnage 248GT

Fuel capacity 18.119 liters 3.986 gal 4.787 USG

Water capacity (excl. calorfier) 3.304 liters 727 gal 873 USG

Hot water calorfiers 436 liters 96 gal 115 USG

Grey water tank 1.232 liters 271 gal 325 USG

Black water tank 1019 liters 224 gal 269 USG


10 persons (5 cabin layout)


5 persons, comprising:

? 1 x captain?s cabin on lower deck ( 4x crew in 2 cabins on lower deck )


TWIN MTU 16V 2000 M96L ( 2 x 2.636 mhp )

Maximum speed 23-25 knots?

Range up to 1,750 nm?


Alfa Laval MIB303 fuel cleaning centrifuge, in addition to standard Separ fuel polishing and conditioning system (includes 150 litre sludge tank to accommodate waste product)


Wasp oil change out unit to cover engines, gearboxes & generators

TRAC 16 X Fin stabiliser system to provide stabilisation underway and also zero speed stabilisation. An additional electro-hydraulic motor powers the system for zero

speed stabilisation when the main engines are shut down


Hull to be painted (not including transom) using Awl Craft 2000. Colour to be 'SHARK' grey (F1441). Boot stripe to be painted 'VIVID RED' (F7200).

Hardtop, arch, radar, mast and satellite communication domes to be painted using Awl Craft 2000. Colour to be ?SHARK? grey (F1441). Paint a single stripe around

the base of each of the two satellite domes. Colour to be 'VIVID RED' (F7200)


Walnut interior wood satin finish (with walnut interior floors)

Crew area furniture to be finished in Satin Alba Oak

Both dining area sideboard units to feature Macassar Straight Grain Starburst timber veneer on the door fronts

Wheelhouse table to be larger with the shape of the table top to match the shape of the step on the wheelhouse floor

Alternative saloon layout with 2 x three seater sofas (one fitted forward and one to port side), end table and two armchairs (not available if port balcony is fitted)

Additional storage lockers and shelving on the flybridge

Custom printer cupboard with pull out shelf in the wheelhouse


5 cabin guest layout incorporating two aft VIP staterooms on the lower deck. (N.B. Saloon dining table to seat up to 10 persons with 2 additional chairs provided)

Port and starboard forward staterooms (in lower accommodation) to have single beds with powered sliding mechanism to convert to double bed

Starboard side folding balcony with sliding doors (in place of full height window)

Supply and fit pullman berth to inboard bulkhead of port and starboard forward staterooms

Electrically operated sliding door between dining area and main lobby

Wheelhouse helm seat with footrest and electrical adjustment in lieu of Captain's seating perch

Standard 35M rectangular coffee table to be made to larger dimensions. Given the increased space with seating off-set to the port side of the saloon

Central window mullion to be removed in dining area on both port & starboard sides

Main deck aft cockpit seating to feature large U shaped sofa

Full height laundry cupboard to be created in alcove within the lower lobby opposite the staircase. Cupboard to feature Macassar Straight Grain Starburst timber

veneer finish on door fronts

Master bathroom layout to be modified as per the following:

- Standard bathtub to be removed

- Toilet and bidet with semi frosted glass partition on the starboard side

- Large twin shower compartment to port side with single central door and semi frosted glass enclosure

- Standard twin sink vanity to remain

Dining area bulkhead design to feature Japanese Fretwork in walnut finish

Flybridge layout to be modified to include the following:

- L shaped seating forward on the port side

- Large square dining table to accommodate 12 dining chairs positioned on centre line

- 2 wet bars positioned on centre line directly aft of the dining table. Forward wet bar facing forwards. Aft wet bar facing aft

- Large U shaped seat aft of wet bars facing forwards positioned on centre line

- Large sun pad directly aft of U shaped seat positioned on centre line

Yacht specific furniture scheme

All 3 wet bars (2 on the flybridge and 1 in the cockpit) to feature slatted teak fronts with dimmable lighting feature (lighting to be positioned every 4 slats)

Lower lobby outboard feature panels to be Calf Crimmings black/bronze plaster work panels


Yacht specific lineout materials

Pintark Lattice design panel in place of the standard flight design panels above the master cabin headboard


Custom stone specification for all bathrooms


Wenge wide plank with V groove timber flooring to be specified in following areas:

- Saloon & Dining (with rug inserts as per GA)

- Lobby

- Servery

- Wheelhouse

Scotch guarding of all interior carpets


Flybridge GRP hardtop with electrically operated opening centre section in white fabric

Side mount stairway with hull fittings port and starboard with storage in forepeak locker

Sun awning covering area 4m aft of flybridge hardtop (featuring carbon fibre poles, stainless steel fixtures, lightweight hydrophobic canvas top with hidden pulley system)

Sun awning extension to cover the remaining area aft of the hardtop (featuring carbon fibre poles, stainless steel fixtures, lightweight hydrophobic canvas top with

hidden pulley system)

Sun awning covering foredeck seating area (excluding the sunbed) (featuring carbon fibre poles, stainless steel fixtures, lightweight hydrophobic canvas top with hidden pulley system)

Removable awning for main deck aft area

Supply two sun lounger cushions for flybridge sun loungers. Fabric choice: Dedar Etoile Ebano

Install anchoring bracket for use of a TRX training system within the hardtop overhead of the flybridge to starboard of the wetbar area

Install a locking device on the cover door for the third control station on the starboard side of the cockpit (not a key lock just a deterrent that is not difficult to openin an emergency)

All sun awnings to be black mesh

Hardtop fabric sliding roof to have black top and charcoal underside


Continental 220V/240v sockets

Underwater transom lights (5 Super Blue OceanLED)

Underwater lighting to aft hull sides (8 Super Blue OceanLED i.e. 4 per side)

Miele professional washing machine / tumble dryer and dishwasher

Drinks refrigerator in flybridge bar (in addition to standard cool box)

Icemaker fitted in cockpit wetbar

Sewage treatment plant (Ecomar 16)

Twin lava brick BBQ in place of standard twin teppanyaki style BBQ NEC

Additional Miele professional dishwasher to be located in servery area in position used for the standard option additional drinks fridge

Water filtration plant (Dometic spot zero unit) combined with additional watermaker

Diesel fuel pump to be installed in the transom garage for refuelling the tender

Docking command station to be installed on the port side bulwark just forward of the side door from the wheelhouse to the side deck

Yacht specific lighting scheme

Additional power sockets and USB ports

Install two power cables that run to the area below the transom garage for use as power supply to optional Seabob battery Fast Chargers (Fast Chargers or Seabob not included)

Lutron electric blinds and curtains to be installed in the master stateroom (inc. ante room) and saloon & dining areas

Accent lighting around the outboard storage locker doors on both sides of the flybridge to be warm white in place of the standard cool

Shorepower converter (ASEA 75kva) in place of standard isolation transformer (including dedicated chilled water cooling system)

Stand alone air conditioning unit to be installed in the tech space to starboard of the garage

Additional waterproof power outlets to be installed in the tender garage (1 double socket on each side aft)

Remote controls for both watermakers to be installed in the wheelhouse

2 CAT 5 plug in points to be positioned on the transom and connected to the router system for dockside data connection

Install air conditioning chillers control panel in the wheelhouse

15" Boning display to be installed in the engine room on the starboard side of the garage bulkhead. Red flashing sounder to be installed in the garage as a repeater alarm to the boning system


28" LED TV with Fusion MS-AV700i Radio/MP3/DVD player fitted in captain's cabin

Saloon TV to be relocated from standard position to the starboard aft diagonal bulkhead

Custom upgraded AV specification


Yacht specific cushion & throw scheme

Mero Portoro marble inlay panels on dining area sideboard counter tops


Radar to be Furuno 3D DRS-12A (6ft/12Kw open array HD scanner) in place of standard

Additional Furuno TZtouch 14? touch screen multi function display at flybridge console

Furuno ultrasonic wind speed instrument

FLIR M625L low light & thermal imaging camera fitted to masthead with picture displayed at both helm positions and control at lower helm

Furuno AIS Class A transponder (in place of standard class B)

NAVIGATION Furuno TZ touch screen multi function display in the crew mess area


Standard Miele under counter 38 bottle 2-zone wine cooler in servery area to be upgraded to full height 144 bottle 3-zone Miele wine cooler

Galley stainless steel custom refrigeration and deep freeze (in lieu of two standard full-height fridge/freezers)

Galley and servery to have Antique Brown granite worktops

Custom colour galley cupboard doors

Custom colour galley splashback

All of the overhead cupboards in the galley to have a single shelf

Galley to feature removable wooden chopping board that fits into recess for the galley sink


All wetbar counter tops to be Ebony solid surface in place of standard Concrete 2003 solid surface

Storage rack to be installed in the garage to accommodate 2 sets of water skis

Tender / Jet Ski mooring whips to be supplied for securing the tender alongside the yacht. To be suitable for Williams 565 Diesel Jet Tender. Whips to be able to be

secured on either Port or Starboard Side

Supply two sets of bed linens (including duvets and pillows) for all berths onboard including pullman berths, sliding berths and crew berths

We can not guarantee the correctness of given information or be liable for any inaccuracy or warrant the condition of yachts

Advid: 423503
€ 13.425.000

0 0
Zuid-Holland, Rotterdam

Contact opnemen met de adverteerder

Contactgegevens verkoper

Princess Yachts Benelux


Princess Yachts Benelux



Er kan geboden worden op deze advertentie.
Doe een Bod!